8 Ways to Fix Liquid Detected in iPhone Lightning Connector
iPhones are known for being quite tough against water, but sometimes people face a problem where their iPhones show a message like “Liquid Detected in Lightning Connector” or “Charging not available.” This can happen if there’s moisture or water inside the charging port. If you’re having this issue, don’t worry! We’ll guide you through some easy steps to fix it.
What to Do When There’s Liquid in Your iPhone’s Charging Port?
If your iPhone is showing a message about liquid in the charging port, there are things you can do to fix it. Let’s see what to do and what not to do.
What to Do?
- No Water Adventures: Keep your iPhone away from water, whether it’s rain, the pool, or your shower.
- Waterproof Protection: If you’re going near water, use a waterproof case or a plastic bag to shield your iPhone.
- Handle with Care: If you’re prone to spilling things, be careful when holding your iPhone around liquids.
What Not to Do?
- Don’t Turn It On: If your iPhone got wet, don’t try turning it on. It’s better to be safe.
- No Rush to Charge: Before plugging it in, make sure it’s dry. Charging wet can cause damage.
- Stay Away from Heat: Don’t put your iPhone close to fire or in a microwave.
- No Blowing or Cleaning: Don’t blow air or try to clean the port yourself unless you know how.
How to Fix Liquid Detected in iPhone Lightning Connector
If your iPhone got wet or is showing the liquid detection message, here are some steps to fix it:
Method 1 – Dry Out the Liquid
- Turn off your iPhone.
- Remove the charging cable and SIM card tray.
- Gently tap your iPhone with the charging port facing down to remove extra liquid.
- Leave your iPhone in a dry place with airflow for about 30 minutes.
(Avoid using a hairdryer or sunlight, as they can make things worse.)
Method 2 – Clean the Port
- Make sure your iPhone is off.
- Use a cotton swab or paper towel to gently clean the charging port.
- Don’t use cleaning sprays, and be very gentle to avoid damage.
Method 3 – Check the Cable
- Check the charging cable for moisture or dirt.
- Clean it gently if needed.
- If it’s corroded, use an eraser to clean it.
Method 4 – Restart Your iPhone
If your iPhone and cable are dry but you still see the error:
- For iPhone 8 and later on iOS 16:
- Quickly press the volume up button, then the volume down button.
- Hold the side button until the Apple logo appears.
- For older iPhones:
- Press and hold the volume down and Sleep/Wake buttons.
- Release them when the Apple logo shows up.
Method 5 – Update iOS
Update your iPhone’s software to fix bugs:
- Go to Settings > General.
- Tap on Software Update.
Method 6 – Try Wireless Charging
If you have a wireless charger, use it for charging.
Method 7 – Emergency Charging Override
Only as a last resort if your phone is dry:
- Connect your iPhone to the charger.
- If it’s not charging, try the force restart from Method 4.
Method 8 – Visit Apple Service
If nothing works, go to an Apple Store or an Authorized Service Center for help.
Fixing the “Liquid Detected in Lightning Connector” error isn’t too hard. Remember to keep your iPhone dry, avoid charging when it’s wet, and follow these steps. If things get tricky, you can always ask the experts at Apple. Stay tuned to GadgetsToUse for more helpful guides like this!